Precautions
Observe the following precautions to prevent fire, personal injury, and transceiver damage.
•When operating mobile, do not attempt to configure the transceiver while driving; it is too dangerous.
•Do not transmit with high output power for extended periods. The transceiver may overheat.
•Do not disassemble or modify the transceiver for any reason, unless instructed by this manual or by Kenwood documentation.
•Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances.
•Do not place the transceiver in excessively dusty, humid, or wet areas, nor on unstable surfaces.
•If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, and contact a Kenwood service station or your dealer.
•Use of the transceiver while you are driving may be against traffic laws. Please check and observe the vehicle regulations in your area.
•Do not use options not specified by Kenwood.
uThe transceiver is designed for a 13.8 V DC (±15%) power source! Never use a 24 V battery to power the transceiver. Check the battery polarity and voltage of the vehicle before installing the transceiver.
uUse only the supplied DC power cable or a Kenwood optional DC power cable.
uDo not insert metal objects into the cooling fan.
uDo not cut and/or remove the fuse holder on the DC power cable. Improper connections and/or current surges may cause smoke or fire.
uFor passenger safety, install the transceiver securely using the supplied mounting bracket and screw set so the transceiver will not break loose in the event of a collision.
uVarious electronic equipment in your vehicle may malfunction if they are not properly protected from the radio frequency energy which is present while transmitting. Electronic fuel injection,
ii
