Kenwood TM-V71E, TM-V71A Auxiliary Functions, Power-Onmessage, Display Brightness

AUXILIARY FUNCTIONS

POWER-ON MESSAGE

Each time you switch the transceiver ON, “HELLO” (default) appears on the display for approximately 2 seconds. You can program your favorite message in place of the default message.

1Enter Menu mode and access Menu 500 (P.ON.MSG) {page 20}.

2Enter your desired message {page 24}.

• Press [PF1] (CLR) to clear the entire message, if necessary.

Display Brightness

You can manually change the display illumination to suit the lighting conditions where you are operating.

1Enter Menu mode and access Menu 501 (BRIGHT) {page 20}.

2Set your desired brightness level from 1 to 8, or OFF.

nAuto Display Brightness

When Auto Brightness is activated, the display will light up every time a key is pressed.

1 Enter Menu mode and access Menu 502 (AUTO.BR) {page 20}.

2 Set the Auto Brightness function to ON or OFF.

62