Kenwood TM-V71A, TM-V71E Auto PM Channel store, PM Channel Reset, 2Press F + Power ON

Auto PM Channel store

After you recall a PM channel, this function automatically overwrites the current PM channel with the present operating environment when:

•You recall another PM channel.

•You press [PM].

•You switch the transceiver power OFF.

Follow the steps below to activate the Auto PM storage function.

1Enter Menu mode and access Menu 521 (AUTO.PM) {page 20}.

2Set AUTO.PM to ON.

PM Channel Reset

To reset the PM channels to their default settings:

1Turn the transceiver power OFF.

2Press [F] + Power ON.

3Release [F].

4Rotate the Tuning control and select PM.

5Press the Tuning control.

•A confirmation message appears on the display.

6Press the Tuning control again to reset the PM channels.

•Press [TONE] (BACK) to return to the previous display.

•To exit without resetting the PM channels, press [F] (ESC).

41