nSelecting a Transmit Speed
Some repeaters may not respond correctly if a code is transmitted at fast speed. If this happens, change the EchoLink transmission speed from FAST (default) to SLOW.
1 Enter Menu mode and access Menu 205 (ELK.SPD) {page 20}.
2Set the speed to FAST or SLOW.
Setting Up EchoLink Sysop MODE
When connected to a PC, you can set whether or not to use the RTS and CTS terminals for hard flow control, or the SQC and PKS terminals for EchoLink. The action band is the data band (Menu 517(DAT.BND)).
1Turn the transceiver power OFF.
2Press [PF2] + Power ON to turn EchoLink Sysop Mode ON.
•The 
icon appears on the display when EchoLink Sysop mode is ON.
•To turn EchoLink Sysop Mode OFF, press [PF2] + Power ON again.
EchoLink Sysop Mode ON
|
| PC |
|
|
|
TxD | RxD | |
|
|
|
RxD | <– | TxD |
|
|
|
SQC | CTS | |
|
|
|
PKS | <– | RTS |
|
|
|
GND | GND |
EchoLink Sysop Mode OFF
| PC | |
|
|
|
TxD | RxD | |
|
|
|
RxD | <– | TxD |
|
|
|
RTS | CTS | |
|
|
|
CTS | <– | RTS |
|
|
|
GND | GND |
Note:
uWhen in EchoLink Sysop mode, you cannot change to Repeater mode or Remote Control mode. Additionally, you cannot use the
uWe recommend you set Menu 520’s SQC output setting to SQL when using EchoLink Sysop mode.
61
