Kenwood TM-V71E, TM-V71A instruction manual Playback Repeat Interval

■Playback

1 Press the PF key programmed as [VGS].

2 Press the key for the VGS channel number you want to play back: [F] (1), [TONE] (2), [REV] (3), or [LOW] (4) (when the Conversation Recorder is ON.)

•The recording saved in the channel you selected is played back.

•To end playback at any time, press [PF1] (CLR).

•To exit, press [VGS] again.

•During playback, you can switch to any of recordings 1, 2, 3, or 4 by pressing the appropriate key.

•While playing a recording, you can transmit the recording by pressing the [PTT] switch. (Continue holding the [PTT] switch until the entire recording is transmitted.)

■Playback Repeat

You can set messages to be repeatedly played back.

1 Enter Menu mode and access Menu 007 (PLAY.BK) {page 20}.

2Set the the Playback Repeat function to ON or OFF.

■Playback Repeat Interval

If the Playback Repeat function is activated, you can set a time interval for how often the memo/message is played back.

1Enter Menu mode and access Menu 008 (P.BK.INT) {page 20}.

2Set the interval from 0 to 60 seconds.

80