Kenwood TM-V71A, TM-V71E Rev, Low, PF1, 0PF2, 1BAND SEL VOL Control, 2SQL Control

uREV

Press [REV] to turn the Reverse function ON or OFF {page 30}. Press [REV] (1s) to turn the Automatic Simplex Checker ON {page 30}. Press [F], [REV] to enter Offset Direction selection mode. Each time you press [F], [REV], the offset direction toggles as follows:

plus (+) direction –> minus (–) direction –> –7.6 MHz (E type only) –> OFF.

iLOW

Press [LOW] to toggle the transmit output power as follows: High Power (K, E types only) –> Middle Power –> Low Power {page 70}. Press [F], [LOW] to turn the Mute function ON or OFF {page 69}.

oPF1

Press [PF1] to activate its programmable function {page 66}. The default function is “Frequency Band Select”.

!0PF2

Press [PF2] to activate its programmable function {page 66}. The default function is “Operation Band Select”.

!1BAND SEL (VOL) Control

Rotate the [BAND SEL] control to adjust the speaker volume {page 14}. Press the left [BAND SEL] to select the A band. Press the right [BAND SEL] to select the B band. Press [BAND SEL] (1s) to toggle between single and dual-band mode.

!2SQL Control

Rotate the [SQL] control to adjust the squelch level. Clockwise opens the squelch and counterclockwise tightens the squelch {page 68}.

!3PM

Press [PM] to enters the PM (Programmable Memory) channel selection mode {page 40}. Press [F], [PM] to enter PM Channel registration mode {page 40}.

!4

Press [] to turn the transceiver power ON and OFF.