Kenwood TM-V71A, TM-V71E Options, Memory control program MCP-2A, nUsing the MCP-2ASoftware

OPTIONS

The following options are available for use with this transceiver:

•	DFK-3D	Detachable Front Panel Kit (3 m)
•	MC-45	Microphone

•MC-59 Microphone with keypad

•MCP-2A Memory Control Program (web download software)

•MJ-88 Microphone Plug Adapter

•MJ-89 Modular Plug Microphone Switch

•PG-2N DC Cable (2 m)

•PG-20 DC Cable (7 m)

•	PG-3B	Noise Filter
•	PG-5A	Data Cable

•PG-5G Programming Interface Cable (2 m)

•PG-5H PC Interface Cable Kit (2 m)

•PG-5F Extension Cable Kit (4 m)

•PS-33 DC Power Supply

•PS-53 DC Power Supply

•SP-50B External Speaker

•VGS-1 Voice Guide & Storage Unit

Note: Optional accessories for use with this transceiver may change, post-production. (New options may become available and/or current options may be discontinued.) Please refer to the options catalog(s) for applicable transceivers.

Memory control program MCP-2A

The following functions can be set only by using the MCP-2A software:

•SQC active condition

•Microphone sensitivity level

•10 MHz mode selection

•Power on password value

Using the MCP-2A software, you can:

•View memory channel groups

•Name memory groups

•Name PM channels

•Save/load settings

•Read exported TravelPlus for Repeaters™ files issued from the ARRL™

•Print/export memory and various settings in html

(TravelPlus for Repeaters is a trademark of ARRL.)

To download the MCP-2A software, go to:

http://www.kenwood.com/i/products/info/amateur.html

Note: This URL may change without notice.

nUsing the MCP-2A Software

1 Follow the directions of the installer to install the software.

2 Set up the PC COM port and baud rate.

3 The transceiver data is read from the MCP-2A software.

4 Select your desired settings, then write the data to the transceiver.

89