Clearing a Memory Channel
1Press [MR] to enter Memory Recall mode.
2Rotate the Tuning control to select your desired Memory channel.
•Additionally, you can press the microphone [UP]/[DWN] keys to select a channel, or you can enter a channel number using the microphone keypad.
3Turn the transceiver power OFF.
4Press [MR] + Power ON.
•A confirmation message appears on the display.
5Press the Tuning control to clear the Memory channel.
•To exit without clearing the channel, press [F] (ESC).
Naming a Memory Channel
You can name Memory channels using up to 6 alphanumeric characters. When you recall a named Memory channel, its name appears on the display instead of the stored frequency. Names can be call signs, repeater names, cities, people, etc.
1Press [MR] to enter Memory Recall mode.
2Rotate the Tuning control to select your desired Memory channel.
3Enter Menu mode and access Menu 200 (M.NAME) {page 20}.
4Enter your desired name for the channel {page 24}.
Note: You can overwrite a Memory channel name by performing the steps above. You can also clear a Memory channel name by clearing the Memory channel.
35
