NEC PA242W user manual English-20

	UNIFORMITY	This function electronically compensates for the slight variations in the white uniformity
		level as well as for deviations in color that may occur throughout the display area of
		the screen. These variations are characteristic of LCD panel technology. This function
		improves the color and evens out the luminance uniformity of the display.
		NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
		display. If greater luminance is desired over the uniform performance of the display,
		then UNIFORMITY should be turned off. A higher number produces a better effect, but
		may also reduce CONTRAST RATIO. When BRIGHTNESS is shown in magenta, the
		UNIFORMITY setting is automatically reduced.
Tag2	SHARPNESS	This is a digital capability for keeping a crisp image at all signal timings. It continuously
		adjusts to maintain as distinct or as soft image as you prefer, and is set independently
		according to different timings. Press “LEFT” or “RIGHT” to adjust.
	RESPONSE	Turns the Response Improve function on or off. Response Improve may reduce blurring
	IMPROVE	that occurs in some moving images.
	ECO MODE	Decreases the amount of power consumed by reducing the brightness level.
		OFF: No function.
		MODE1: Decreases the maximum possible brightness up to about 200 cd/m2.
		MODE2: Decreases the maximum possible brightness up to about 100 cd/m2.
	AUTO BRIGHTNESS	AUTO BRIGHTNESS has two settings. “OFF” is recommended for best color reproduction.
		OFF: No function.
		ON: Adjusts the brightness automatically, by detecting the brightness level of your
		environment and adjusting the monitor with the best BRIGHTNESS setting.
		Please refer to Page 32 for full “Auto Brightness” information.
		Note: Do not cover environmental brightness sensor (AUTO DIMMING SENSOR).
	METAMERISM	Improves the white point color matching when the display used side-by-side with a
		standard gamut display monitor. This feature compensates for the way the human eye
		perceives colors slightly differently compared to the scientifi c instrument used to adjust
		the display during calibration.
	AMBIENT LIGHT	Luminance setting depends on ambient light compensation.
	COMP.	Mostly affects black reproduction.
		NOTE: AUTO DIMMING SENSOR measures ambient brightness when power is on and
		affects image and color quality settings.
		NOTE: Do not cover environmental brightness sensor (AUTO DIMMING SENSOR).
	(6 - AXIS ADJUST)	HUE: Adjusts the hue of each color*1. The change in color will appear on screen and the
		menu color bars will show the amount of adjustment.
		SATURATION: Adjusts the color depth of each color*1. Press the “RIGHT” button and the
		color vividness increases.
		OFFSET: Adjusts the color brightness of each color*1. Press “RIGHT” button and the
		color Brightness increases.
		*1: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.
	SHORTCUT	You can select the PICTURE MODE which are displayed in PICTURE MODE shortcut
	CUSTOM	menu.
Tag3	R-H.POSITION*	Adjusts the position of the red component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	G-H.POSITION*	Adjusts the position of the green component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	B-H.POSITION*	Adjusts the position of the blue component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	R-FINE*	Adjusts the “FINE” setting of the RED component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	G-FINE*	Adjusts the “FINE” setting of the GREEN component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	B-FINE*	Adjusts the “FINE” setting of the BLUE component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	R-SHARPNESS*	Adjusts the sharpness of the red component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	G-SHARPNESS*	Adjusts the sharpness of the green component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.
	B-SHARPNESS*	Adjusts the sharpness of the blue component of the image.
	(Analog input only)	Press “LEFT” or “RIGHT” to adjust.

* Only for PA242W.

English-20