| POWER SAVE | ON: Monitor automatically changes to OFF mode after 2 hours of continuous |
| English |
| TIMER | signal. |
| |
|
| OFF: Monitor will not automatically change to OFF mode when no video signal is |
| |
|
|
|
| |
|
| connected. |
|
|
|
|
|
|
|
| OFF MODE | The Intelligent Power Manager allows the monitor to enter into a power saving mode after |
|
|
|
| a period of inactivity. The OFF MODE has four settings. |
|
|
|
| OFF: Monitor does not go into power save mode when the input signal is lost. |
|
|
|
| STANDARD: Monitor enters power save mode automatically when the input signal is lost. |
|
|
|
| ADVANCED: The signal detection circuit works always. Recovery time to normal mode is |
|
|
|
| faster than STANDARD. Power consumption is higher than STANDARD. |
|
|
|
| NOTE: When set to STANDARD, if the image does not reappear when the signal is |
|
|
|
| restarted, please change the setting to ADVANCED. |
|
|
|
| OPTION: Monitor enters power save mode automatically when the amount of |
|
|
|
| surrounding light goes below the level that is determined by the user. |
|
|
|
|
|
|
|
| OFF MODE SETTING | Adjusts the ILLUMINANCE value for OFF MODE. Shows illuminance. |
|
|
|
|
|
|
|
| LED BRIGHTNESS*2 | Controls the brightness of the power LED on the monitor. |
|
|
| LED COLOR*2 | Toggles the power LED on the front between blue or green. |
|
|
Tag7 | LANGUAGE*2 | OSD control menus are available in nine languages. Press “LEFT” or “RIGHT” to select. |
|
|
| OSD H.POSITION | You can choose where you would like the OSD control image to appear on your screen. |
|
|
|
| Selecting OSD Location allows you to manually adjust the position of the OSD control |
|
|
|
| menu left or right. |
|
|
|
|
|
|
|
| OSD V.POSITION | You can choose where you would like the OSD control image to appear on your screen. |
|
|
|
| Selecting OSD Location allows you to manually adjust the position of the OSD control |
|
|
|
| menu up or down. |
|
|
|
|
|
|
|
| OSD TURN OFF | The OSD control menu will stay on as long as it is use. You can select how long the |
|
|
|
| monitor waits after the last touch of a button to shut off the OSD control menu. |
|
|
|
| The preset choices are |
|
|
|
|
|
|
|
| OSD LOCK OUT*2 | This control completely locks out access to all OSD control functions. When attempting |
|
|
|
| to activate OSD controls while in the Lock Out mode, a screen will appear indicating the |
|
|
|
| OSD controls are locked out. |
|
|
|
| There are three types of OSD LOCK OUT: |
|
|
|
| OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, |
|
|
|
| then “RIGHT” button and hold down simultaneously. To deactivate the OSD Lock Out, |
|
|
|
| press SELECT, then “RIGHT” button and hold down simultaneously while in the OSD |
|
|
|
| menu. No controls can be adjusted while in the lock out mode. |
|
|
|
| OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock |
|
|
|
| Out function, press SELECT, then “DOWN” and “LEFT” buttons and hold down |
|
|
|
| simultaneously. To deactivate the OSD Lock Out, press SELECT, then “DOWN” and |
|
|
|
| “LEFT” buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS |
|
|
|
| can be adjusted while in the lock out mode. |
|
|
|
| CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or |
|
|
|
| DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS), PICTURE MODE, |
|
|
|
| WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD Lock |
|
|
|
| Out function, press RESET and EXIT to bring up the LOCK OUT warning. |
|
|
|
| Press SELECT, SELECT, <, >, <, >, EXIT. |
|
|
|
|
|
|
|
| OSD TRANSPARENCY | Adjusts the transparency of the OSD MENU. |
|
|
|
|
|
|
|
| OSD COLOR*2 | “Tag window frame color”, “Item select color” & ”Adjust Window frame color” can be |
|
|
|
| changed. |
|
|
|
|
|
|
|
| BOOT LOGO*2 | The NEC logo is briefl y displayed after the monitor is powered on. This feature can be |
|
|
|
| turned on or off in the OSD. |
|
|
|
| Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGO |
|
|
|
| menu will appear. It is possible to change the BOOT LOGO setting to OFF. |
|
|
|
|
|
|
|
| SIGNAL | Signal information can be displayed in the corner of the screen. |
|
|
| INFORMATION*2 | Signal information is either “ON/OFF”. |
|
|
| RESOLUTION | The optimal resolution is 1920 x 1200 for PA242W, 2560 x 1440 for PA272W or |
|
|
| NOTIFIER*2 | 2560 x 1600 for PA302W. If ON is selected, a message will appear on the screen after |
|
|
|
| 30 seconds, notifying you that the resolution is not set to 1920 x 1200 for PA242W, |
|
|
|
| 2560 x 1440 for PA272W or 2560 x 1600 for PA302W. |
|
|
|
| Press “LEFT” or “RIGHT” to select. |
|
|
|
|
|
|
|
*2 This item does not reset by FACTORY PRESET (Tag7).
