Tools
PIP MODE
Select PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY PICTURE - FULL. You can select individual PICTURE MODE in each screen.
This display can display 2 inputs at a time.
|
| PICTURE BY | PICTURE BY |
OFF | PIP | PICTURE - ASPECT | PICTURE - FULL |
*1, *3, *4
*2, *5, *6
*2, *5, *6
MAIN IMAGE ROTATION: ON / SUB IMAGE ROTATION: ON
|
| PICTURE BY | PICTURE BY |
OFF | PIP | PICTURE - ASPECT | PICTURE - FULL |
*3, *4
*2, *5, *6
*2, *5, *6
(PA242W)(PA242W)
PIP INPUT
Selects the PIP input signal.
PIP LEFT/RIGHT
Controls the horizontal position of the Picture in Picture window in PIP mode.
PIP DOWN/UP
Controls the vertical position of the Picture in Picture window in PIP mode.
PIP SIZE
Selects the size of the
USB SELECTION
Change USB upstream input associated with the current display input, 1 or 2. When connecting a computer to each of the upstream ports, the monitor's USB downstream ports can be used by selecting this setting for the current input signal.
You can change the active display and upstream USB port combination by using the Input button (see page 11). You can set the USB selection for each input signals in Advanced menu (see page 22).
When using only one upstream port, the connected upstream port is used by default.
NOTE: To avoid data loss, before changing USB upstream ports, ensure that no USB storage devices are in use by the operating system of the computer attached to the USB upstream port.
VIDEO DETECT
Selects the method of video detection when more than one video input is connected.
FIRST: When current video input signal is not present, then the monitor searches for a video signal from the other video input(s) port. If a video signal is present in another port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present.
LAST: When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor will automatically switch to the new video source. When current video input signal is not present, then the monitor searches for a video signal from the other video input port(s). If the video signal is present in another port, then the monitor switches the video source input port to the new found video source automatically.
NONE: The Monitor will not search the other video input port unless the monitor is turned on.
OFF TIMER
Monitor will automatically
Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes. Press any OSD button to delay the
*1 PA272W/PA302W: Sub Window by DisplayPort or DVI is displayed on the left half of the display only.
Sub Window by HDMI or
*2 PA272W/PA302W: When Main Window is
When PICTURE BY PICTURE - ASPECT/FULL is selected, it is impossible to change the Main Window Input to
Print Emulation setting or “6 - AXIS ADJUST” setting by MultiProfi ler will result the following cases depending on the setting conditions.
*3 Setting for only one screen: the setting result is refl ected on the corresponding Window (Main or Sub). Same setting for both screens: the setting result is refl ected on both Main and Sub Windows.
*4 Individual setting for each screen: the setting result is refl ected on Main Window only. Then Warning
*5 Individual setting for each screen: the setting result is refl ected on Main Window only. Then Warning
*6 Setting for only one screen: the setting result is refl ected on the corresponding Window (Main or Sub). Same setting for both screens: the setting result is refl ected on both Main and Sub Windows (PA242W only).
