Kenwood TM-V71A, TM-V71E External Speaker Configuration, Masking a Band, Band Output, Setup

External Speaker Configuration

This transceiver has two speaker jacks for external speakers, as well as an internal speaker. You can enjoy a variety of speaker configurations by using one or two external speakers. Received signals on bands A and B are output depending on how you want the internal and/or external speakers to function.

1Enter Menu mode and access Menu 002 (EXT.SP) {page 20}.

2Set the speaker mode to MODE 1 or MODE 2.

• Refer to the table below for configurations based on the mode selected.

	Speaker		Band Output
Mode
		Internal
	Setup		External SP1	External SP2
		Speaker
	None	A, B	–	–
MODE 1	SP1 only	x	A, B	–
	SP2 only	A	–	B
	SP1, SP2	x	A	B
	None	A, B	–	–
MODE 2	SP1 only	x	A, B	–
	SP2 only	B	–	A
	SP1, SP2	x	B	A

Masking a Band

If you have no plans to use band A or B, you can hide the frequency display on the unused band. This saves power consumption and makes it simpler to read the information you need.

1Turn the transceiver power OFF.

2Press the left or right [BAND SEL] + Power ON.

• The band mask display appears.

3Rotate the Tuning control to select the band you want to hide (or return to normal).

71