Kenwood TM-V71E, TM-V71A Storing Data in PM Channels, Recalling PM Channels, Press F, PM

Storing Data in PM Channels

1Confirm that the following conditions have been satisfied:

•The transceiver is in receive mode.

•Scan is not being used.

•Microphone Control is OFF.

2Configure the transceiver with your desired settings.

3Press [F], [PM].

•PM channel numbers 1 to 5 appear and blink at the bottom of the display.

4Enter a channel number ([1] to [5]) corresponding to your desired PM channel.

•The settings are stored in the PM channel.

Recalling PM Channels

1Press [PM].

•PM channel numbers 1 to 5 and OFF appear on the bottom of the display.

2Enter a channel number ([1] to [5]) corresponding to your desired PM channel.

•The settings stored in the PM channel are recalled.

•The selected channel number appears on the display.

•When selecting [OFF], the PM channels turn off.

40