Agilent Technologies service manual 85330A Error Messages

Programming

85330A Error Messages

Error Number	Error Message
1306	“Not enough header entries for this driver”
1500	“Trigger source already allocated”
1501	“Instrument in use”
1510	“Trigger source non-existent”
2000	“Invalid card number”
2001	“Invalid channel number”
2002	“Invalid logical address”
2003	“Invalid word address”
2004	“Invalid address for 32-bit access”
2005	“No card at logical address”
2006	“Command not supported on this card”
2007	“Bus error”
2008	“Scan list not intiialized”
2009	“Too many channels in channel list”
2010	“Scan mode not allowed on this card”
2011	“Empty channel list”
2012	“Invalid channel range”
2021	“Trigger line not supported by extender”
2145	“Config warning, Non-volatile RAM contents lost”
2601	“Channel list required for this function”

6-36 85330A Multiple Channel Controller