Performance Verification
2 | Performance Verification |
|
|
In This Chapter | • |
| • |
| • |
| • |
Recommended performance verification test equipment Performance verification tests
Verifying the multiple channel controller Verifying the RF switches
Description
This performance verification should be done once a year, or more frequently as needed. This procedure verifies that the Agilent 85330A system meets or exceeds its published specifications. Specifications are listed in Chapter 4, “General Information.” If traceability to a local standards organization is required, then it can be done with this procedure. One such standards organization is the United States National Institute of Standards and Technology (NIST, formerly NBS).
This verification can be performed at the measurement system’s site, or at a service bench. The verification will verify all parts of the multiple channel system: multiple channel controller, switches, and cables. This verification does not check the performance of the measurement system’s transmitter or receiver. Use the measurement system’s manual for more information on that procedure.
85330A Multiple Channel Controller |
