Using your microwave oven
Microwave oven controls
There are four parts in the control section:
-Number Pads
-Cooktop Fan and Light Controls
When you first plug in the oven, a tone sounds and the Display will be blank. If after you set the Clock [page 6) the Display becomes blank again, it means your electricity was off for a while. Reset the Clock.
Instructions for each control are covered in the following pages. Read them carefully,
wave oven, it dis- plays time settings, signal lights and shows you what Number Pads you touched.
While the oven is running, a Signal Light (or lights) will be on to show what the oven is doing.
Command pads
Touch Command Pads to tell the mlcrowave oven what to do and In what order A few examples.
- CLOCK SETtells the oven you are going to set the clock.
- START tells the oven to start
See page 18 for information on the tone you hear when touching any pad.
Each Command
Pad [except START and CHANGE/ CANCEL] lights a Signal Light on the digital display.
5