
4.2 Configuring NetWare 4.x — Bindery Emulation
Note
•The command at the console prompt takes effect immediately. The def- inition in the autoexec.ncf file takes effect when the server is shut down and then restarted.
4.2.2Configure in Bindery Mode with
PCONSOLE
Once you confirm the server has Bindery Context, use the following procedure to configure the NIC.
1.Log into the network as ADMIN.
2.Type PCONSOLE and press Enter . The following screen appears.
Available Options
Print Queues
Printers
Print Drivers
Quick Setup
Change Context
3.When the Available Options menu appears, press F4 (for the Bindery Mode).
Note
•If you receive a message asking you to login to a server with Bindery connections, the server you are attached to does not have Bindery Mode enabled. Follow the procedures in 4.2.1 Confirm Bindery Con- text or log onto a server with Bindery Services activated.
4.From the Available Options screen, select Quick Setup and press
Enter .
NetWare Configuration Chapter 4