Using a Web Browser Appendix C
C.1 Accessing the HTTP Server Screens
Important!
•To change network settings you must first type the correct password (same as the management password) in the password field provided.
•Clicking a button to execute a network setting change operation while the wrong password is in the password field causes the password error screen to appear, without changing the setting.
C.1.1.1 Reset
Use this screen when you need to reset the NIC to allow newly set parameter values to take effect.
Note that resetting the NIC fully initializes the network interface, without initializing the interface with the printer.
C.1.1.2 Factory Defaults
Use this screen when you need to restore the factory defaults when you move the NIC to a new location or to clear incorrect settings.
Note
•Settings made will not be recognized by the printer until the power to the printer is turned off and then on again.
C.1.1.3 Unit Status
This screen shows the status of each protocol.
C.1.1.4 Network Address
The serial number of the unit as well as the MAC Address can be confirmed from this screen.
C.1.1.5 Change Password
The password you specify here is the one you type in before changing NIC parameters and printer settings.
