Hitachi Koki USA DDC 35n user manual Loading the AppleTalk NIManage Utility Program

AppleTalk Configuration Chapter 5

5.2 Loading the AppleTalk NIManage Utility Program

10.The options available at this point depend on your printer driver. With a typical driver, you may select SETUP. Then select AUTO SETUP. There will be a series of messages as the Chooser commu- nicates with the printer and locates the proper PPD. The setup screen will return, listing the PPD file selected. Select OK. Then exit from Chooser.

5.2Loading the AppleTalk NIManage Utility Program

The AppleTalk NIManage utility program has the following functions:

•View the names of the printer or printer zone.

•Enable or disable the status report.

•View the error log.

•Enable or disable other protocols and view or modify the TCP/IP address, subnet mask, and default gateway address.

Use the following procedure to get access to AppleTalk NIManage utility program:

1.Insert the CD-ROM into the CD-ROM drive.

2.Double-click the NIC mac icon from the CD-ROM.

3.Click the CD-ROM Contents button to display the Introduction screen.

4.Click Installation/Configuration Program located at the bottom of the Introduction screen.

5.Select the NIManage AppleTalk Administration Program item to start the NIManage program. The Zone and Device screen is displayed.

5-2