6.2 UNIX Printing
6.When a window appears, change the values shown to configure the NIC. The values displayed are default values. You must replace the short and long form filter values with the values shown below.
Requested Informa- | Example | Description of | |
tion Input Data | Input Data | ||
| |||
|
|
| |
Name of queue to add | printer1 | Name of local | |
|
| printer | |
|
|
| |
queue Destination | printfast | NIC hostname as in | |
Host |
| /etc/hosts | |
|
|
| |
Short Form Filter | /usr/lpd/bsdshort | Required value | |
|
|
| |
Long Form Filter | /usr/lpd/bsdlong | Required value | |
|
|
| |
Name of remote | PORT1 | NIC | |
printer queue |
|
| |
|
|
| |
Name of device to add | print1 | Name of local | |
|
| queue | |
|
|
|
7.After you have replaced all values, press Enter . You can now print.
6.2.2.3 Setting Up an AIX 4.0 System
Use the following procedures to install a NIC in an AIX 4.0 system:
1.Run SMIT Printer.
2.Select Print Spooling.
3.Select Add a Print Queue.
4.Select Remote.
5.Use Standard Processing.
6.Assign a queue name.
7.Use the host address of the NIC for the Remote System.
8.Use PORT1 for the queue on the remote system.
9.Add a description (optional).
10.Press Enter to generate.
TCP/IP Configuration Chapter 6
