
TCP/IP Configuration Chapter 6
6.2UNIX Printing
2.Select your system. Choose one from these options:
1)AT&T/SVR4; 386
2)SCO UNIX System V
3)None of the above
Type 1, 2, or 3 and press Enter .
3.“What is the node name of the NIC?”
Type the name assigned in the /etc/hosts file and press Enter . For example: Type printfast and press Enter .
4.“What is the printer name for this
5.Your screen will now display the information you provided the install script. For example:
Node name of the NIC: printfast
Printer name to be used: <printer_name>
The printer is attached on: PORT 1
6.“Do you want to accept this configuration?” Type yes or no and press Enter .
7.“Is this printer PostScript?”
Type yes or no and press Enter .
8.The script automatically starts the daemon for the newly config- ured printer. It also displays the path used should you ever need to restart the daemon. In the preceding example, the path would be:
/usr/nic/lpr_print /dev/nic/<printer_name>
printfast 10001 &
This example reflects names supplied the script earlier.
When the installation script is complete, you must still configure the printer and make it known to the lp system.