
TCP/IP Configuration Chapter 6
6.2UNIX Printing
3.At the prompt, type:
#lpadmin
host name or IP address>!PORT1
Note
•There is no space after the remote host name.
4.At the prompt, type:
#enable <local printername>
#accept <local printername>
6.2.3Installing TCP/IP for NIC If Not Running lpd
The
•DEC ULTRIX 4.3 RISC
•System V Rel. 4
•Solaris (Ver. 1.x, 2.x)
•SCO UNIX
•OSF1/ALPHA
•IBM AIX
•HP/UX
Once the NIC has its IP information loaded, the following steps are necessary for
1.Load the print server software on your workstation. It is presented as a tar file on the
2.Run the appropriate installation script, if available.
3.Complete the configuration for your operating system.