7.3Resetting the NIC to Factory Default
7.3Resetting the NIC to Factory Default
You can cause the NIC to restore all parameters to factory default values, so the NIC appears just as it came from the factory. You may choose to do this when the NIC is moved to a new location where the environment (NetWare file servers, IP subnets, and so on) is different.
This process is called “Reset to Factory”. It can be done with the standard Telnet or Web pages (accessed via MAP or a Web Browser) utility. However, if network access is not possible, the following method may be used.
Note
•Resetting to factory default means that the print server loses all data such as names and IP addresses. It does not lose its serial number and MAC Address.
Operation and Troubleshooting Chapter 7
