6.3 Running Telnet
6.3.4 Enable/Disable Network Protocols
To enable network protocols, at the Main menu type 3 and press Enter . You are given the choice of disabling either NetWare or AppleTalk.
6.3.5 Reset Unit
In order to reset the NIC, type 4 into the main menu and press Enter on the keyboard.
Note that resetting the NIC initializes the network interface without effecting the printer interface.
6.3.6 Restore Factory Defaults
When it is necessary to restore factory defaults on your print server, choose 5 on the Main Menu and press Enter . All NVRAM stored parameters return to their factory default values. The factory default values will not take effect until the Telnet program is exited and the unit is power cycled.
6.3.7 Change Password
When you want to establish a new password, enter 6 from the Main menu. Type up to eight characters after the New Password query and press Enter . Retype the same characters at the Retype New Password query and press Enter . Use the Save Changes and Exit option. Once you have established your password using Change Password, the password sysadm will be rejected.
Note
•There is a single maintenance access password to the NIC. This pass- word is used for both Telnet and HTML pages. This password may be changed from Telnet or from HTML pages (accessed either via MAP or Web Browser).
TCP/IP Configuration Chapter 6
