NetWare Configuration Chapter 4
4.1 Configuring NetWare 2.15 and 3.x
When you are finished, turn the printer off and on again. The printer creates a status report that indicates the file servers to which the unit is attached and the queues which it services.
Before you begin:
•Verify that you have supervisor privileges on the file servers on which the NIC print server is to be entered.
•Verify that your version of PCONSOLE is later than 1.0.
4.1.1 Start PCONSOLE and Select File Server
Follow these steps to start PCONSOLE:
1.Log in to the network, type PCONSOLE and press Enter .
2.Choose Change Current File Server from the Available Options menu. This displays a list of file servers.
3.Select the file server on which you want to install the print server
and press Enter | . If the name of the file server you want is not dis- |
played, press | Insert to get a list of file servers. |
4.Log in to the file server.
5. Press Esc to return to the Available Options menu.
4.1.2 Create Print Queues
The NIC must be assigned to at least one print queue on the file server.
•If the print queue that you want the NIC to service already exists, and you know the name of this queue, go to 4.1.3 Enter the Print Server Name.
•If you do not know the name of the queue, or it does not exist, use
the following procedure:
1.Choose Print Queue Information from the Available Options menu, and press Enter . This displays a list of existing queues.
2.To create a new queue, press Insert . Type the name of the queue and press Enter . You do not need to enter any more information at this time.
3. Press Esc to return to the Available Options menu.
