
Utilizing Windows Programs Chapter 3
3.1 Discovery Program – ManagementtAccessProgram(MAP)AP)
3.1Discovery Program – Management Access Program (MAP) –
The Management Access Program (MAP) uses a
•Configure your network protocols for the NIC.
•Reset the NIC remotely to either clear an error condition, or return the print server to its factory default settings.
•Troubleshoot problems in the NIC.
•Enable or disable the status report printout.
Note
•To be able to change parameter values with the MAP or the Web Browser, you must know the NIC management password. The factory default password is “sysadm”.
3.1.1 Installing the MAP
Use the following procedure for an automatic installation of the MAP. If the opening screen does not appear as described in step 1, follow the instructions for the manual installation procedure.
1.Insert the
2.Click the
3.Click Installation/Configuration Programs located at the bottom of the Introduction screen.
4.Select the program that you want to install and follow the instruc- tions displayed on the screen.