Utilizing Windows Programs Chapter 3

3.1 Discovery Program – ManagementtAccessProgram(MAP)AP)

Note

The maximum hop value defines the maximum number of subnetworks the program will search to find a NIC. Setting a value 0 tells discovery program to search only within the subnet to which the workstation is connected. A hop value of 2 tells discovery program to search all net- works accessible through as many as two routers. A value of 15 or greater specifies automatic search of all connected networks, but this is not recommended because of the amount of traffic it generates.

3.After the settings are the way you want, click OK to set them and close the dialog box.

3.1.3 Using the MAP

Use the following procedure to start up MAP and search for all compatible NICs that are available on a network.

1.Click Start, point to Programs, and then point to MAP.

2.Click MAP.

A list of NICs found by the MAP search appears on the Web Browser installed on the workstation.

To configure or reconfigure a particular NIC, click its serial number in the Web Browser list.

Clicking a NIC serial number displays the Printer Management page of the card’s onboard HTTP server. See Appendix C for details of how to use this page to configure or reconfigure the NIC.

3-4

Page 42
Image 42
Hitachi Koki USA DDC 35n user manual Using the MAP