7.2 Status/Configuration Report
7.2 Status/Configuration Report
The Status/Configuration report is sent as a print job to the printer when the print server is powered on. For example, the report on the next page shows the configuration of the print server immediately before the report is printed. Some printers also allow you to use a command from the front panel that produce a Status/Configuration report.
It is strongly recommended that you review this report immediately after installation and any time the setup has been changed. If the report does not include a protocol that was configured, check that the procedure was done properly.
Unit Serial No: 460121 | Version: 02.11 |
Network Address: 00:20:6b:aa:bb:cc | |
Network Topology:Ethernet | Connector: RJ45 |
Network Speed:10 Megabits |
|
Novell Network Information | enabled |
Print Server Name: MLT_460121 |
|
Password Defined: No |
|
Preferred Server Name: SERVER1 |
| |
Directory Services | Tree: DSTREE1 | |
Directory Services | Context: DSCONTEXT1 | |
Frame Type: Novell | 802.3 |
|
enabled | ||
Frame Type: Novell | 802.3 |
|
Network ID: 3221866504 |
| |
TCP/IP Network Information | enabled | |
Frame Type: Ethernet II | Protocol Address:192.9.200.200 | |
Subnet Mask: 255.255.255.0 | Default Gateway: 192.9.200.254 | |
Operation and Troubleshooting Chapter 7
