Telex IP-223 technical manual Per Line Setup Window-Phone Mode Configuration, Auto Answer Field

Per Line Setup Window—Phone Mode Configuration

Per Line Setup Window—Phone Mode Configuration

The Per Line Setup window for Phone Mode configuration, see Figure 105, appears when Phone is selected from the Line Type drop down menu on the Multicast Address Setup window. In Phone mode, the following options are available for per line configuration.

FIGURE 105. Per Line Setup - Phone Mode (view 1)

Auto Answer Setup

Auto Answer Field

The Auto Answer field identifies the number of times the phone rings before the line goes offhook. This field is used to remotely enable a IP-223 to PIB or TDI connection.

Auto Disconnect Time Field

The Auto Disconnect Time field identifies the amount of time, in seconds, before the IP-223 automatically places the PIB or TDI adapter onhook or disconnects if the threshold entered in the LAM Level field described below is not reached.

Delay Setup

TX Delay Field

The TX Delay field identifies the delay, in ms, of TX audio. When TX Ethernet packets arrive, the PTT relay is closed and TX audio is delayed for the specified time. This provides the ability to overcome timing issues involving repeater attack time or trunking (clear to talk) delays.

The range for this field is 0 to 2000ms.

69