Setup Information

Welcome Window

The Welcome window provides a basic description of the IP-223 operating modes and a field to enter a descriptive name for the unit. This name is displays at the top of each IP-223 web setup window

NAVIGATION: Clicking the picture of the IP-223on the links displays the Welcome window, shown in Figure 90.

FIGURE 90. Welcome Window

To change the name of the IP-223 unit, do the following:

1.In the Console Name field, enter the desired name (up to 12 characters).

2.Click Submit.

The name appears at the top of the setup window.

3.From the links, select Save to EEPROM. The Save Setup Parameters window appears.

4.Click Save Parameters.

The changes made are saved to permanent memory.

42

Page 40
Image 40
Telex technical manual Welcome Window, To change the name of the IP-223 unit, do the following