Telex IP-223 Per Line Setup Window-iDEN Radio Configuration, ANI Call Type Drop Down Menu

Per Line Setup Window—iDEN Radio Configuration

FIGURE 110. ANI Call Type Drop Down Menu

ANI Call Format Field

The ANI Call Format field, identifies the call string format for the ANI Decoder #.

This field can contain up to 16 digits,

ANI Call formats include digits 0 - 9, A-D (A-F for other formats), *, # and the following characters:

I (Caller ID) – Placed into the ID field of the ANI packet or the ANI field of the caller portion of the telegram. The ID is stored as a 32-digit string in the packet.

G (Group Digits) – Stored in the Group section of the ANI packet. The group value is converted to a decimal number and is stored as an 8-digit string in the packet.

S (Status) –	Digits represented by S are interpreted as status information. These values are converted to decimal
	numbers and stored as an 8-digit status string in the ANI packet. The console has a corresponding list
	of the status numbers and descriptions that are displayed upon receipt of the packet.
P (Pause) –	When inserted into the string, a pause is expected in this location. The pause duration is set in the
	Pause Duration field (see “Pause Duration Field” on page 67).
R (Calling ID) –	Used to delineate the location of the digits being used for a selective call. These digits represent the
	address or ID of the person being called. They are stored in the ANI packet as an 8-digit string.

Per Line Setup Window—iDEN Radio Configuration

The Per Line Setup window for iDEN Radio configuration, see Figure 111, appears when iDEN is selected from the Line Type drop down menu on the Multicast Address Setup window. In iDEN mode, the following options are available for per line configuration. DEN operation and field programming, download the NI-223 manual at www.telex.com/radio dispatch.

For more information on iDEN operation and field programming, download the NI-223 manual from www.telex.com/radiodispatch.

77