Setup Information

FleetSync Encode Check Box (Local Mode Only)

The FleetSync Encode check box indicates the line is enabled to encode Kenwood FleetSync signaling.This optional feature enables FleetSync PTT ID, status, selective call, and text messaging.

If selected, “Additional Feature Setup Window” on page 100, must be configured.

MDC Decode Check Box (Tone and Local Modes)

The MDC Decode check box is used to enable the line to receive and decode Motorola MDC signaling to display ID numbers, status IDs, emergency calls, and alerts. If selected, MDC signaling is enabled and the ID number or name is decoded via the ANI lookup tables and displayed on Telex IP based consoles.

MDC Encode Check Box

The MDC Encode check box is used to enable the line to transmit and encode Motorola MDC signaling to display the consoles ID number, status ID, emergency or alert. If selected, MDC Signaling is enabled and the ID number or name is encoded via the ANI lookup tables and appears on the MDC radio in the field

IMPORTANT: This feature is not enabled on versions 4.100 or earlier. The MDC Encode check box serves as a placeholder for future implementation.

Tone Type Drop Down Menu

The Tone Type drop down menu, shown in Figure 103, identifies the signaling type used when receiving a call.

Available selections for this field are: None, CCIR1, CCIR2, DTMF, DZVEI, EEA, EIA, EURO, KENWOOD 5TONE, MODAT, NATEL, PCCIR, PDZVEI, PZVEI, ZVEI1, and ZVE12.

FIGURE 103. Tone Type Drop Down Menu

66

Page 64
Image 64
Telex IP-223 FleetSync Encode Check Box Local Mode Only, MDC Decode Check Box Tone and Local Modes, MDC Encode Check Box