Manual Entry Field

The Manual Entry field is used to enter the VoIP hardware’s IP Address to add to the left navigation pane.

Login Group Box

Username Field

The Username field is used to enter the administrator’s username.

NOTE: When updating firmware, admin is the only administrator’s username.

Password Field

The Password field is used to enter the administrator’s password, if one is required.

Write Firmware Button

The Write Firmware button is used to begin the upload process. Once the button is selected, the file specified in the File field is uploaded to the VoIP hardware.

Close Button

The Close button is used to close the window.

Upload VoIP Hardware Firmware

Once TSM is installed and your new .tfb file is downloaded, you are ready to upload the VoIP hardware’s firmware.

To upload the VoIP hardware’s firmware, do the following:

1.Click the TSM shortcut on your desktop.

OR

From your taskbar, click StartProgramsTelex CommunicationsTelex System Manager. The Telex System Manager window opens.

2.Click ToolsFirmware Update The Firmware Update Tool opens.

3.To locate the .tfb file for upload, click the folder icon . The Open window appears.

4.Select the.tfb file you want to upload. The file is highlighted.

5.Click Open.

The selected file appears in the File field.

NOTE: If the device does not appear in the list, enter the VoIP hardware’s IP Address in the Manual Entry field

and click the Add button . The IP Address appears in the left navigation pane.

6.In the left navigation pane, select the device’s IP Address. The Write Firmware button is active.

7.Click the Write Firmware button.

Firmware update messages are shown in the Status column which provides feedback on the firmware update progress. Once the progress reaches 100%, the firmware is updated.

NOTE: If an error occurs, the Progress column is reset and an error message appears in the Status column.

121

Page 119
Image 119
Telex IP-223 technical manual Login Group Box, 121, Upload VoIP Hardware Firmware