Clone Console Window

Clone Console Window

The Clone System Parameters window provides the ability to copy the setup information, other than the serial number, base IP Address and mask address from one IP-223 unit to another IP-223 unit.

NAVIGATION: Clicking Clone Console displays the Retrieve Configuration Data from Remote IP-223 window shown in Figure 127.

FIGURE 127. Clone System Parameters

To copy configuration data from one IP-223 unit to another IP-223 unit, do the following:

1.Connect both IP-223 units to the Ethernet network.

2.Follow the steps in “To access the IP-223 web setup windows, do the following:” on page 39 to access the IP-223 web setup windows for the IP-223 unit the configuration data is to be copied to.

3.From the links, select Clone Console.

The Retrieve Configuration Data from Remote IP-223 window appears.

4.In the Enter IP Address field, enter the IP Address of the remote IP-223 the configuration data is to be copied from.

5.Enter the username and password of the local IP-223.

6.Click Submit.

The setup information, other than the serial number, base IP Address, and mask address is sent to the IP-223 for storage.

7.From the links, select Save to EEPROM. The Save Setup Parameters window appears.

8.Click Save Parameters.

The entries are saved to permanent memory.

101

Page 99
Image 99
Telex IP-223 technical manual Clone Console Window, 101