Mic Click Call Enabled Check Box | Telex IP-223 specs

Setup Information

RX Delay Field

The RX Delay field identifies the amount of time, in ms, RX audio is recorded and stored. RX audio is constantly recorded by the IP-223 and when a COR or LAM triggered detect occurs, the IP-223 goes back the specified time of delay to start generating Ethernet packets. This provides the ability to prevent lost first syllables using COR.

The range for this field is 0 to 1000ms.

LAM Setup

LAM Level Field

The LAM Level field identifies the threshold, in dB, at which the radio/line un-mutes and sends RX packets to the Ethernet.

The range for this field is -50 to +10dB.

LAM Time Field

The LAM Time field identifies the amount of time, in seconds, the console continues to play audio when receiving audio above the LAM threshold specified in the LAM Level field. This entry is also used by the Ethernet to determine how long to send audio.

The range for this field is 0 to 60 sec.

Mic Click Setup

Mic Click Call Enabled Check Box

The Mic Click Call Enabled check box indicates whether or not a remote radio user can click the radio PTT a specified number of times within a specified period of time to dial a programmed number. If selected, a remote radio user can click the radio PTT a specified number of times within a specified period and, upon receipt of this sequence, the IP-223 takes the PIB or TDI offhook and automatically dials the number in the Click Dial String field.

Number of Clicks Field

The Number of Clicks field identifies the number of times the radio PTT must be pressed to automatically dial the number in the Click Dial String field.

The range for this field is 1 to 5.

Time Between Clicks Field

The Time Between Clicks field identifies the amount of time, in ms, allowed between mic clicks.

The range for this field is 0 to 9999ms.

Click Dial String Field

The Click Dial String field identifies the number automatically dialed when the radio PTT is pressed the number of times specified in the Number of Clicks field.

70

Image 68

Telex IP-223 Mic Click Call Enabled Check Box, Number of Clicks Field, Time Between Clicks Field, Click Dial String Field

Contents

Model IP-223 Remote Adapter Panel Technical Manual Sales Contents General Gain Setup Save to Eeprom Window Update Firmware Figures Call Type Drop Down Menu iDEN Mode List Tables Page Overview Operating Modes Features Console Mode Connection IP-223 Accessories Part Number Description Front Panel IP-223 SpecificationsTest and Adjustment Points LCD Display Handset JackIC Button Line Button TX LED 10/100 Ethernet Connector Serial ConnectorBack Panel Jumper position Connection type Radio 1 and Radio 2 Line 1 and Line 2 Connectors Power Connection Pin # Signal Cable color Ctcss Overview Multicast Network RequirementsBandwidth Internet Group Management Protocol Igmp Network Performance Jumper Positions To adjust the position of a jumper, do the followingLocal/Radio Connections Installation and Level Settings Line 1 jumpers J3, J9, and J11 TX Audio ConnectionRX Audio Connection COR Carrier Operated Relay I/O Input/Output PTT ConnectionMonitor Connection R1 and R2 Relays Wire Jumper Settings TX Side SettingsTone/Console Operation Digital I/O Level Adjustments Local PTT I/OCross Mute I/O Supervisory I/O Line TX Monitor Level Tone and Console Mode only General AlignmentRadio/Line TX Level Radio/Line RX Level Frequency Decoding Ctcss Level Setup Information Setting the IP Address Information Using HyperTerminal Com1 Properties window appears Main HyperTerminal window appears Enter Password for Factory Setup appears Serial port access window shown in appears Close the HyperTerminal program Accessing IP-223 Web Browser Configuration Windows To access the IP-223 web setup windows, do the following Link Description IP-223 Web Setup Windows StandardsLinks Click Save Parameters To permanently save changes, do the followingClick Save to Eeprom Welcome Window To change the name of the IP-223 unit, do the following MAC Address Basic Ethernet Setup WindowSerial Number Field Packet Delay before Playback Field QOS Quality of Service Precedence Bits FieldUse Dhcp Server Check Box Unit IP Address Field Local Computer IP Address 1-10 Fields Routing R To configure the IP-223 for use, do the following Submit Button General Gain Setup Handset Mic Gain Drop Down MenuHandset Sidetone Gain Drop Down Menu Receive Gain Drop Down Menu TX Voice Gain Field Transmit Gain Drop Down MenuCtcss Gain Drop Down Menu Line Number Field Multicast Address Setup WindowEnable via Ethernet Check Box RX Mcast Address Field Line Type Drop Down MenuLine Name Field RX Port Field TX Mcast Address FieldTX Port Field TX Group Port Field Multicast Address Field Enable Check BoxVocoder Type Drop Down Menu Incoming Port Field Outgoing Port FieldName Field Mcast Address Field Port Field Per Line Setup Window Per Line Setup Local, Tone, and Console Modes view Line 1 Button COR Active High check box LAM Enabled Check BoxCOR Enabled Check Box TX Delay Field RX Delay FieldSquelch Tail Delay Field Update Button Tone Enable Check Box Relay Drop Down MenuRelay Group Drop Down Menu Relay Time ms Field Digital Output Field Local Mode Only Ctcss Freq Field Local Mode OnlyCtcss Default Check Box Local Mode Only System Field Local Mode LAM Level Field LAM Time Field Options PTT Timeout Field Wire Check BoxSerial Port Mode Drop Down Menu Parallel Console Check Box Serial Port Drop Down Menu Local Mode Serial Port Params Drop Down Menu Signaling Setup FleetSync Decode Check Box Tone and Local Modes FleetSync Encode Check Box Local Mode Only MDC Decode Check Box Tone and Local ModesMDC Encode Check Box Tone Type Drop Down Menu ANI Suffix Field Digit Duration FieldInterdigit Duration Field Pause Duration Field ANI Call Type Drop Down Menu ANI Call Format Field Auto Disconnect Time Field Per Line Setup Window-Phone Mode ConfigurationAuto Answer Field Mic Click Call Enabled Check Box Number of Clicks FieldTime Between Clicks Field Click Dial String Field Click Dial Timeout Field Relay Closure R1 Ring Check Box Rx AGC Enabled Check Box Keep Alive Digits Enabled Check BoxStar/Pound Keying Enabled Check Box Detect Tones Enabled Check Box Serial Port Mode Drop Down Menu Serial Port Parameters Drop Down Menu Serial Port Params Drop Down Menu Phone Mode FleetSync Decode Check Box MDC Decode Check Box ANI Decoder Field Per Line Setup Window-iDEN Radio Configuration ANI Call Type Drop Down Menu Per Line Setup iDEN Radio Mode view Jump To Entry Drop Down Menu Call Type Drop Down Menu IDEN Number Field Per Line Setup iDEN Mode view F1 Last Call Check Box iDEN Mode only PTT Timeout Field Per line Setup Window-Tetra Radio Configuration Per Line Setup Tetra Mode view Relay Drop Down Menu Type Drop Down Menu ISSI/GSSI Number Field TX Delay Field LAM Level Field PTT Timeout Field Reset IP-223 Button Click Reset IP-223Save to Eeprom Window Save Parameters Button User System Account Account Setup WindowAdmin System Account Enable Check Box Password FieldNew Password Field Username Display Column Confirm Password Field To enable the user account, do the followingEdit Button Save Button Reset System Parameters Button Edit System Accounts WindowDelete Button Add New User Button Password can be 4-16 alpha-numeric characters in length Username Field Add New User WindowChoose a Username Additional Feature Check Box Account Setup Check BoxBasic Ethernet & Multicast Setup Check Box CRP Setup & PIN Table Check Box Cancel Button Tone Freq & Durations Check Box Edit Created Account-Account Setup Edit Created Accounts Window 100 Additional Feature Setup WindowTo activate a special feature, do the following Clone Console Window 101 Crosspatch Setup Window 102 103 Jump To Entry Drop Down Menu and Go Button 104RCP Tables Mode Drop Down Menu 105Delete String Field Phone Field Dial option only Command Buttons 106 107 Next 10 ButtonTo define the crosspatch parameters, do the following Submit CRP PIN Table Window 108 PIN Enable Check Box 109Entry Field PIN Field 110 Prev 30 Entries ButtonNext 30 Entries Button To define crosspatch PIN numbers, do the following Pass Change Window 111 Monitor Frequency Field Tone Frequency & Durations Window112 113 114 Function Tone Duration FieldFunction Tone Magnitude Field FTone 1-16 Frequency Fields 115 116 117 Update FirmwareInstall TSM Confirm Installation 118 119 Download Telex Firmware 120 Update Firmware Tool WindowFirmware File Info Group Box Upload VoIP Hardware Firmware Login Group Box121 Firmware Update Tool- Success Messages Click Close 122 Connectors AdjustmentsConnector Description Signal Line Test point Jumper Settings 124PCB 750743 or PCB 750630 revision F PCB 750743 or PCB 750630 revision C, D, E, and F Jumper Locations 125 126 Additional Resources 127 Relm RM Series Radios to 223 Series Adaptor Panels 128 Relm GMH Radios to IP-223 Adaptor Panels 129 130 Tone Freq Number Ctcss Tone Frequency Table131 132 Digital Output Values Digital Output Table133 134 Tone Frequency Table 135Tone Number Code Digit European Tone Frequencies in Hz Motorola 136 137