Telex IP-223 technical manual Local Computer IP Address 1-10 Fields, Routing R

Basic Ethernet Setup Window

QOS: D, T, and R (Delay, Throughput, and Reliability) Bits Field

The QOS: D, T and R Bits field is used for advanced programming purposes. These bits are usually 0. Contact your network administrator to obtain the appropriate value for this field.

		Delay (D)			an active delay bit tells the router to choose a high speed to minimize delay
		Throughput (T)			an active throughput bit specifies high capacity links should be used.
		Routing (R)			an active routing bit directs routing protocols and network management applications to select
					fault-tolerant paths.
For more information on the binary equivalent for delay, throughput, and reliability see Table 6 on page 45.
The range for this field is 0 to 7.
TABLE 6. D, T, R Binary Reference
			Precedence Field							D, T, and R bits
		Binary			Traffic Type		Binary
	0	0	0	(0)	Best Effort	D	T	R
0		0	1	(1)	Background	0	0	0	(0)	Normal (Best Effort), minimal cost
0		1	0	(2)	Standard	0	0	1	(1)	Maximize Reliability
0		1	1	(3)	Excellent Load	0	1	0	(2)	Maximize Throughput
1		0	0	(4)	Controlled Load	1	0	0	(4)	Minimize Delay
1		0	1	(5)	Video
1		1	0	(6)	Voice
1		1	1	(7)	Network Control

Local Console IP Address

Local Computer IP Address 1-10 Fields

The Local Computer IP Address fields identify the base IP Address of up to 10 IP-223 units within the same room. These fields are generally used when the selected line mode is console. The entries are used for the Ethernet crossmute function. The IP-223 examines the source of the audio and flags it if the source from one of the IP-223 units listed in these fields.

45