
6.3 Running Telnet
2.Type 1 again and press Enter . The IP Address submenu will appear:
The Configuration Utility
Unit Serial no. 460121 V5.04
1. | IP Address | 192.9.200.200 |
2. | Subnet Mask | 255.255.255.0 |
3.Default Gateway 199.9.200.254
4.Base Port Number 10000
3.Enter a new IP Address and press Enter . Repeat the previous steps to change Subnet Mask and Default gateways.
4.Enter 4 to change the base port number.
Note
•The base port number is one less than the actual TCP/IP port number used by the printer. For example, to set the port number to 9100, enter 9099.
6.3.3 Select Printer Languages
Selection 2 in the Main Menu allows you to designate which emulations (printer interpreter languages) the printer supports. This is to allow the resident lpd to modify files intended for other emulations so that they may be printed. The menu also allows you to enable or disable banners attached to lpd handled jobs.
The emulation choices are Printer Control Language (PCL), PostScript (PS), ASCII (simple text) and Other (any print job not recognized as PCL, PS, or ASCII). The file modifications and conditions are:
TCP/IP Configuration Chapter 6