Hitachi Koki USA DDC 35n user manual IP Peer-to-Peer Printing Program

3.1Discovery Program – Management3.2IP Pe r- oAccess-Peer ProgramrintingProgram(MAP)

3.2IP Peer-to-Peer Printing Program

This section describes how to set up and use the IP Peer-to-Peer Printing program. With the setup procedure, you set up your print server ports for printing from a Windows environment.

3.2.1Installing the IP Peer-to-Peer Printing Program

Use the following procedure for automatic installation of the IP Peer- to-Peer Printing Program. If the opening screen does not appear as described in step 1, follow the instructions for the manual installation procedure.

1.Insert the CD-ROM into your workstation’s CD-ROM drive. The opening screen appears automatically.

2.Click the CD-ROM Contents button to display the Introduction screen.

3.Click Installation/Configuration Programs located at the bottom of the Introduction screen.

4.Select the program that you want to install and follow the instruc- tions displayed on the screen.

You can use the following procedure to manually install the IP Peer-to- Peer Printing program.

1.Insert the CD-ROM into your workstation’s CD-ROM drive.

2.Run the program. (In this example, we assume that D: is drive your workstation’s CD-ROM drive.)

D:\Ip-P2p\Setup.exe

Utilizing Windows Programs Chapter 3

3-5