5. Disconnect the keyboard cable from the system board.
Installing the Keyboard
1. Connect the keyboard cable to the system board.
2. Slide the keyboard into its compartment and until it clicks into place.
3. Tighten the screws to secure the keyboard to the palmrest assembly.
4. Align the keyboard trim on its compartment and press along the sides until it snaps in place.
5. Install the battery.
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the Palmrest Assembly
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a. SD card
b. ExpressCard
c. battery
d. keyboard
e. display-hinge cap
f. base cover
g. base corner caps
3. Remove the screws that secure the palmrest assembly to the base of the computer.
26