Installing the Display Assembly
1.Place the display assembly in its position on the computer.
2.Tighten the screws to secure the display assembly.
3.Route the LVDS cable and the camera cable through the routing channel.
4.Route the antenna cables through the routing channel.
5.Connect the antenna cables to the WLAN card on the computer.
6.Connect the camera cable to the computer.
7.Install:
a.base corner caps
b.base cover
c.
d.battery
8.Follow the procedures in After Working Inside Your Computer.
Removing the Display Bezel
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove: a. battery
44
