NetWare Configuration Chapter 4

4.1Configuring NetWare 2.15 and 3.x

4.1.4Configure the Print Server

Use the following procedure to configure the Print Server’s function:

1.Choose the print server name from the Print Servers list and press

Enter .

The Print Server Information menu appears.

2.Choose Print Server Configuration from the menu and press Enter .

3.Choose Printer Configuration from the menu and press Enter . This displays the Configured Printers menu. Since this is a new Print Server entry, all printers are labeled “Not Installed”.

4.Choose the printer and press Enter . The Printer 0 Configuration screen appears with a title of Printer 0, as shown in the following example.

5.If you choose to, change the default in the Name field on this form to MFP or something else that helps you identify the printer. The print server uses this name in its message back to the users on the Notify list. Select Name, enter a name, and then press Enter .

6.Select Type and press Enter . This displays a list of printer types. Choose Remote Other/Unknown and press Enter . This creates default entries in the other fields. These defaults are usually opti- mal, so do not change them without specific knowledge of the effects.

7.Press Esc . At the prompt, choose to save your changes.

4-4

Page 58
Image 58
Hitachi Koki USA DDC 35n user manual Configure the Print Server