Intel AXXSW1GB manual Configuring CoS General Parameters

Models: AXXSW1GB

1 220
Download 220 pages 19.14 Kb
Page 119
Image 119

Configuring CoS General Parameters

The CoS Global Settings Page contains information for enabling QoS globally and on specific interfaces. After QoS has been configured, the original device QoS default settings can be reassigned to the interface in the CoS Global Settings Page.

To enable QoS:

1.Click QoS > General > CoS. The CoS Global Settings Page opens:

Figure 75. CoS Global Settings Page

The CoS Global Settings Page contains the following:

QoS Mode — Determines whether QoS is enabled on the device. The possible values are:

Disable — Disables QoS on the device.

Basic — Enables CoS Basic mode on the device.

Advanced — Enables Advanced CoS mode on the device.

Ports — Displays the ports on which CoS is enabled.

LAGs — Displays the LAGs on which CoS is enabled.

Interface — Displays the interface for which the global QoS parameters are defined.

Port — Selects the port for which the global QoS parameters are defined.

LAG — Selects the LAG for which the global QoS parameters are defined.

Default CoS — Determines the default CoS value for incoming packets for which a VLAN priority is not defined. The possible field values are 0-7. The default CoS is 0.

106

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide

Page 119
Image 119
Intel AXXSW1GB manual Configuring CoS General Parameters, Click QoS General CoS. The CoS Global Settings Page opens