To configure Trunk Group Failover:
1.Click Layer 2 > Interface > Trunk Group Fail Over. The Trunk Group Fail Over Page opens:
Figure 31. Trunk Group Fail Over Page
The Trunk Group Fail Over Page contains the following fields:
•Group Failover Status — Enables the Trunk Group Failover feature on the device. The possible field values are:
—Enable — Enables Trunk Group Failover on the device.
—Disable — Disables Trunk Group Failover on the device.
•Group — Displays the Trunk Group number.
•Group State — Indicates the Trunk Group state. The possible field values are:
—Up — Indicates the group state is active.
—Down — Indicates the group state is inactive.
•Port — Displays the port added to the specific Trunk Group.
•Type — Displays the port type. The possible field values are:
—Uplink — Ports that connect the switch and external network to the associated internal ports and server NIC.
—Associated — Ports that are associated with an Uplink port.
•Port State — Indicates the port state within the Trunk Group. The possible field values are:
—Up — Indicates the port is in the Up state.
—Down — Indicates the port is in the Down state.
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide | 45 |
