Configure Bandwidth Settings

The Bandwidth Settings Page allows network managers to define the bandwidth settings for a specified interface. Queue shaping can be based per interface. The queue shaping type is selected in the Bandwidth Settings Page.

To define bandwidth settings:

1.Click QoS > General > Bandwidth Setting. The Bandwidth Settings Page opens:

Figure 78. Bandwidth Settings Page

The Bandwidth Settings Page contains the following fields:

Ports — Displays the port table for which the bandwidth settings are defined.

LAGs — Displays the LAG table for which the bandwidth settings are defined.

Interface — Displays the interface list for which the bandwidth settings are defined.

Ingress Rate Limit — Indicates the traffic limit for the port.

Status — Indicates if Ingress Rate Limit is enabled on the interface.

Rate Limit — Defines the rate limit at which network traffic is forwarded.

110

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide

Page 123
Image 123
Intel AXXSW1GB manual Configure Bandwidth Settings