![](/images/new-backgrounds/1195990/195990225x1.webp)
Defining Multiple STP Interface Settings
Network Administrators can assign Multiple STP Interface Settings in the Interface Settings Page.
To define Interface settings:
1.Click Layer 2 > Multiple STP > Interface Settings. The Interface Settings Page opens:
Figure 73. Interface Settings Page
The Interface Settings Page contains the following fields:
•Instance ID — Lists the MSTP instances configured on the device. Possible field range is
•Interface — Displays the interface for which the MSTP settings are displayed. The possible field values are:
—Port — Specifies the port for which the MSTP settings are displayed.
—LAG — Specifies the LAG for which the MSTP settings are displayed.
•Port State— Indicates whether the port is enabled for the specific instance. The possible field values are:
—Enabled — Enables the port for the specific instance.
—Disabled — Disables the port for the specific instance.
•Type — Indicates whether the port is a Boundary, Master or an internal port. The possible field values are:
—Boundary Port — Indicates that the port is a Boundary port. A Boundary port attaches MST bridges to LANs in an outlying region. If the port is a Boundary
100 | Intel® Gigabit Ethernet Switch AXXSW1GB User Guide |