
Defining VLAN Interface Settings
The Interface Settings Page contains fields for managing ports/LAGs that are part of a VLAN. The Port Default VLAN ID (PVID) is configured on the Interface Settings Page. All untagged packets arriving at the device are tagged with the port PVID.
To define VLAN interfaces:
1.Click Layer 2 > VLAN > Interface Settings. The Interface Settings Page opens.
Figure 38. Interface Settings Page
The Interface Settings Page contains the following fields:
•Ports — Indicates the port membership.
•LAGs — Indicates the LAG membership.
•Interface — Displays the interface number included in the VLAN.
•Interface VLAN Mode — Displays the interface mode. The possible values are:
—General — Indicates the interface belongs to VLANs, and each VLAN is user- defined as tagged or untagged (full IEEE802.1q mode).
—Access — Indicates a interface belongs to a single untagged VLAN. When an interface is in Access mode, the packet types which are accepted on the port
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide | 53 |