
The Multicast Group Page contains the following fields:
•Enable Bridge Multicast Filtering — Indicate if bridge Multicast filtering is enabled on the device. The possible field values are:
—Checked — Enables multicast filtering on the device.
—Unchecked — Disables multicast filtering on the device. If multicast filtering is disabled, multicast frames are flooded to all ports in the relevant VLAN. Disabled is the default value.
•VLAN ID — Identifies a VLAN and contains information about the multicast group address.
•Bridge Multicast Address — Identifies the multicast group MAC address/IP address.
•Ports — Displays port that can be added to a multicast service.
•LAGs — Displays LAGs that can be added to a multicast service.
•Interface — Displays the interface used to manage the device.
•Interface Status — Indicates the port/LAG status in relation to the Multicast group.
—Static — Attaches the port/LAG to the Multicast group as static member.
—Dynamic — Dynamically joins the port/LAG to the multicast group in the Current Row.
—Forbidden — Indicates the port/LAG is not included in the Multicast group, even if IGMP snooping designated the port to join a Multicast group.
—Exclude — Indicates the port/LAG is not part of a Multicast group.
2.Click
. The Add Multicast Group Page opens:
Figure 61. Add Multicast Group Page
3.Define the relevant fields.
4.Click . The Multicast group is defined, and the device is updated.
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide | 81 |