HP A7540-96010 manual Enter the password for your account name

Installing

2.Enter your account name on the remote host and the IP address of the remote host. When prompted for the source file name, enter the path for the firmware image file. When prompted to install the new firmware, enter Yes to continue or No to cancel. This is the last opportunity to cancel.

User Account : johndoe

IP Address : 10.20.20.200

Source Filename : 4.0.3.xx_mpc

About to install image. Do you want to continue? [y/n] y

Connected to 10.20.20.200 (10.20.20.200).

220 localhost.localdomain server (Version wu-2.6.1-18) ready.

3.The switch attempts a non-disruptive activation if possible; otherwise a disruptive activation is performed. When prompted to install the new firmware, enter Yes to continue or No to cancel. This is the last opportunity to cancel.

About to install image. Do you want to continue? [y/n] y

Connected to 10.20.20.200 (10.20.20.200).

220 localhost.localdomain server (Version wu-2.6.1-18) ready.

4. Enter the password for your account name.

331 Password required for johndoe.

Password:******

230 User johndoe logged in.

The firmware is downloaded from the remote host to the switch, is installed, and is activated.

HP StorageWorks 2/8q Fibre Channel Switch Installation Guide 39