Installing
Install SFP transceivers
The switch has been validated with transceivers that support a variety of interconnection media. To install a transceiver, insert the transceiver into the port and gently push in on the SFP until the it snaps in place. To remove a transceiver, gently press the transceiver into the port to release the tension, and then pull out on the release tab to remove the transceiver from the chassis.
Note: The transceiver fits only one way in the port. If the transceiver does not install under gentle pressure, pull it out of the port, turn it over, and
Figure 13: Installing an SFP transceiver
34 | HP StorageWorks 2/8q Fibre Channel Switch Installation Guide |
