HP A7540-96010 manual Attaching the mounting adapter brackets to the switch

Models: A7540-96010

1 70
Download 70 pages 39.93 Kb
Page 31
Image 31

Installing

d.Remove the locking nut on the rail retaining bracket and move the bracket to the farthest position inside the rail. (Figure 8)

2

1

Figure 8: Moving the rail retaining bracket on the right rail - rear view

e.Repeat step a through step d for the other rail.

5.Fasten the mounting adapter brackets to the sides of the switch. (Figure 9)

a.Place the switch on a stable work surface, and then position the switch and the brackets so that the port-side of the switch faces the flanges of the brackets.

b.Determine which mounting set-back on the brackets to use. The brackets can be mounted so that the switch is flush with the rear of the rack, or set back approximately three inches.

c.Use four of the provided screws to attach the brackets to the switch.

Figure 9: Attaching the mounting adapter brackets to the switch

HP StorageWorks 2/8q Fibre Channel Switch Installation Guide

31

Page 31
Image 31
HP A7540-96010 manual Attaching the mounting adapter brackets to the switch